ML100.200
DIN rail power supplies for 3-phase system
24 V, 4.2 A
| DC output |
24 - 28 Vdc |
| |
4.2 - 3.6 A |
| |
100 W |
| Input |
AC 380 - 480 V (± 15 %) |
| Dimensions (WxHxD) |
73 x 75 x 103 mm |
| Weight |
360 g |
Input data
| AC Input voltage |
AC 380 - 480 V (± 15 %) |
| Power factor |
0.6 |
| Input inrush current limitation |
NTC |
| Input inrush current |
30 A / 36 A |
| External input fuse recommendation |
B-10 A / C-6 A |
Output data
| Nominal voltage |
24 Vdc |
| Adjustment range |
24 - 28 V |
| Output current range |
4.2 - 3.6 A |
| Output current |
3.6 A at 28 V |
| |
4.2 A at 24 V |
| Output power |
100 W |
| Derating |
2.5 W/°C for >+60 °C |
| Ripple and noise voltage max. |
50 mVpp |
Overview
| Dimensions (WxHxD) |
73 mm x 75 mm x 103 mm |
| Weight per unit (excl. packaging) |
360 g |
| Mounting method |
DIN rail |
| Connection method |
Spring clamps |
| Efficiency, typ. |
89.5 % |
| Power losses, typ. |
11.7 W |
| MTBF SN 29500 @ 40 °C (h) |
1594000 h |
The ML100.200 is a simple and cost effective approach to convert the AC voltage of a typical three phase system into a regulated DC voltage. It only requires two phases and thereby saves terminal space, terminal cost, wires, fuses and installation time.
The ML100.200 is very compact, high efficient and easy to use. The input is internally protected, which makes external fuses unnecessary in many cases.
Weighing only 360g, it is a lightweight compared to the 50/60Hz control transformers, which are commonly used for low-power control voltages where a neutral wire is not available.
High immunity to transients and power surges as well as low electromagnetic emission makes usage in nearly every environment possible.
Audited Supplier 
){kind=link}
){kind=link}